Akcje serwisowe KTM 1290 2015

Wyniki wyszukiwania akcji serwisowych

Data akcji Marka / Model Problem Działanie serwisowe Zakres produkcji Ref. producenta Liczba pojazdów
2019-04-01
KTM - 1290 SUPER ADVENTURE
Produktionsfehler führt zu Kraftstoffaustritt an der Verschraubung der Tankabdeckung. Die Kraftftofftanks werden überprüft und betroffene Teile ausgetauscht. 2015-01-01 → 2016-01-01 TI07_936115 1264
2019-02-06
KTM - 1290 SUPER ADVENTURE
IN THE SEAT AREA THERE MAY BE MINIMAL FUEL LEAKAGE Check for leaks replace tank if leak evidenced.If no leak evident fit a retrofit kit to prevent leaks occurring in the area. 2014-11-27 → 2016-09-27 07_936115 339
2018-01-25
KTM - 1290 SUPER DUKE R SE
THE FLOATING PISTON IN THE FRONT BRAKE MASTER CYLINDER MAY CRACK On affected machines replace the floating piston in the front brake master cylinder with a modified version 2015-03-19 → 2017-12-19 14_408753 1938
2018-01-25
KTM - 1290 SUPER DUKE R
THE FLOATING PISTON IN THE FRONT BRAKE MASTER CYLINDER MAY CRACK On affected machines replace the floating piston in the front brake master cylinder with a modified version 2015-03-19 → 2017-12-19 14_408753 1938
2018-01-25
KTM - 1290 SUPERDUKE GT
THE FLOATING PISTON IN THE FRONT BRAKE MASTER CYLINDER MAY CRACK On affected machines replace the floating piston in the front brake master cylinder with a modified version 2015-03-19 → 2017-12-19 14_408753 1938
2016-11-15
KTM - 1290 SUPER ADVENTURE, 1190 ADVENTURE
Aufgescheuerter Kabelstrang kann zum Ausfall eines Bremskreises führen. Verlegung des Kabelstranges kontrollieren und mittels Kabelbinder zu korrigieren. 2013-01-01 → 2016-01-01 N/A 5352
2016-11-04
KTM - 1290 S/ADV/R
HAMULCE MOGĄ ULEC AWARII Recall the machines that are likely to be affected to check and where necessary correct the routing of the wiring harness. If a wiring harness has been damaged the correct level of repair will be applied after advice is sought from the manufacturer. 2013-01-15 → 2016-04-27 TI 11_181394 1527
2016-04-29
KTM - 1290 SUPER ADVENTURE
SHOCK ABSORBER MAY FAIL Recall the machines that are likely to be affected and check for fluid leakage from the plug of the semi-active shock absorber. If there is visible leakage the shock absorber will be changed for a new unit and mounted with the original preload adjuster. If there is no leakage the original shock absorber can remain in please. In all cases check the software and update as necessary. 2014-11-26 → 2015-12-01 TI_04_140903 199